Three rods of the same dimensions have thermal conductivities $3K, 2K$ and $K$. They are arranged as shown in the figure with their ends at $100\,^{\circ}C, 50\,^{\circ}C$ and $20\,^{\circ}C$. The temperature of their junction is....... $^{\circ}C$

$A$ cylindrical rod has temperatures $\theta_1$ and $\theta_2$ at its ends. The rate of heat flow is $Q$. All the linear dimensions of the rod are doubled while keeping the temperatures constant. The new rate of flow of heat is

One end of a copper rod of length $1.0 \; m$ and area of cross-section $10^{-3} \; m^2$ is immersed in boiling water and the other end in ice. If the coefficient of thermal conductivity of copper is $92 \; cal/(m \cdot s \cdot ^\circ C)$ and the latent heat of ice is $8 \times 10^4 \; cal/kg$,then the amount of ice which will melt in one minute is:

Two metal rods $1$ and $2$ have the same length and the same temperature difference at their ends. Their thermal conductivities are $K_1$ and $K_2$ and their cross-sectional areas are $A_1$ and $A_2$ respectively. The condition for the same rate of heat flow in them is ........

$A$ slab of stone of area $3600 \, cm^2$ and thickness $10 \, cm$ is exposed on the lower surface to steam at $100^{\circ} C$. $A$ block of ice at $0^{\circ} C$ rests on the upper surface of the slab. In one hour, $4.8 \, kg$ of ice is melted. The thermal conductivity of the stone in $J \, s^{-1} \, m^{-1} \, K^{-1}$ is (Latent heat of ice $= 3.36 \times 10^5 \, J/kg$)

Two vessels of different materials are similar in size in every respect. The same quantity of ice filled in them gets melted in $20$ minutes and $40$ minutes respectively. The ratio of thermal conductivities of the materials is